DC6 NIGHT FOREST
TWO MATERIALS. ONE ARCHITECTURE.
248 000 CHF
Carbon belongs to aerospace and Formula 1. Light and strong simultaneously. On the wrist, a watch for active life. One you do not feel. The veined surface of UD carbon pulls the piece back toward nature. Wood grain. The same lines, the same underlying order found in the trees of the Risoux. Mechanical and natural. Contemporary and rooted. Both true at once.
DC6 NIGHT FOREST
TWO MATERIALS. ONE ARCHITECTURE.
248 000 CHF
Carbon belongs to aerospace and Formula 1. Light and strong simultaneously. On the wrist, a watch for active life. One you do not feel. The veined surface of UD carbon pulls the piece back toward nature. Wood grain. The same lines, the same underlying order found in the trees of the Risoux. Mechanical and natural. Contemporary and rooted. Both true at once.
CARBON THAT LASTS
The DC6 Night Forest uses UD carbon — unidirectional — not forged carbon. The difference is structural. Forged carbon is fragments of fiber in resin: random, resin-dependent, prone to micro-cracking over time. UD carbon is continuous fiber sheets, each ply rotated 45 degrees from the last, stacked in 30-micron layers. The resin is secondary. The fibers run through the full thickness of the material without interruption. Under impact, force travels along the fibers rather than concentrating at failure points. It does not scratch easily. It does not degrade. It does not develop a patina. In twenty years, the case will be exactly as it is today.
ARCHITECTURE: TITANIUM DRESSED IN CARBON
Carbon is porous. A physical reality. The movement lives in a titanium container. The case is then dressed: caseband and bezel in UD carbon, held together by titanium brancards that extend naturally into the lugs. No adhesive. Fully mechanical. Waterproof to 50 metres.
The DC6 Night Forest is read with the hands as much as with the eyes. Titanium on the lugs: clean edges, cold at first contact. UD carbon on the case: warm, textured, immediate. The Pointes du Risoux guilloché — hand-finished on titanium, the DC6's signature since 2018 — is felt under the finger. No crystal over the dial. Two sapphire domes invite the eye inside: the tourbillon at 9 o'clock, the hours and minutes subdial at 3 o'clock.
THE DIAL: A TROMPE-L'OEIL IN THREE ACTS
Three separate processes. One coherent surface. The dial is domed — the movement architecture beneath requires it. A sunray finish applied by hand, striations radiating from the centre outward: light does not reflect uniformly, it moves with the wrist. Anodisation at the voltage limit of the accessible spectrum to reach this topaz green of mountain lakes in clear weather. A few volts off and the shade shifts. Translucent lacquer across the entire surface resonates with the sunray finish, adding depth that anodisation alone cannot produce. The smoked gradient does not exist. A single translucent black circle, applied by airbrush, is read by the eye as depth. Numerals and indices in silver powder, applied by decal transfer in layers. Chapter ring in black gold.
CARBON THAT LASTS
The DC6 Night Forest uses UD carbon — unidirectional — not forged carbon. The difference is structural. Forged carbon is fragments of fiber in resin: random, resin-dependent, prone to micro-cracking over time. UD carbon is continuous fiber sheets, each ply rotated 45 degrees from the last, stacked in 30-micron layers. The resin is secondary. The fibers run through the full thickness of the material without interruption. Under impact, force travels along the fibers rather than concentrating at failure points. It does not scratch easily. It does not degrade. It does not develop a patina. In twenty years, the case will be exactly as it is today.
ARCHITECTURE: TITANIUM DRESSED IN CARBON
Carbon is porous. A physical reality. The movement lives in a titanium container. The case is then dressed: caseband and bezel in UD carbon, held together by titanium brancards that extend naturally into the lugs. No adhesive. Fully mechanical. Waterproof to 50 metres.
The DC6 Night Forest is read with the hands as much as with the eyes. Titanium on the lugs: clean edges, cold at first contact. UD carbon on the case: warm, textured, immediate. The Pointes du Risoux guilloché — hand-finished on titanium, the DC6's signature since 2018 — is felt under the finger. No crystal over the dial. Two sapphire domes invite the eye inside: the tourbillon at 9 o'clock, the hours and minutes subdial at 3 o'clock.
THE DIAL: A TROMPE-L'OEIL IN THREE ACTS
Three separate processes. One coherent surface. The dial is domed — the movement architecture beneath requires it. A sunray finish applied by hand, striations radiating from the centre outward: light does not reflect uniformly, it moves with the wrist. Anodisation at the voltage limit of the accessible spectrum to reach this topaz green of mountain lakes in clear weather. A few volts off and the shade shifts. Translucent lacquer across the entire surface resonates with the sunray finish, adding depth that anodisation alone cannot produce. The smoked gradient does not exist. A single translucent black circle, applied by airbrush, is read by the eye as depth. Numerals and indices in silver powder, applied by decal transfer in layers. Chapter ring in black gold.
UNIQUE FEATURES
Magic Crown
Signature patented retractable crown made of 31 components, integrated at 6 o’clock for comfort and fluid design.
30° Inclined Flying Tourbillon
Flying tourbillon set at 30°, visually captivating and engineered for precise chronometric performance.
Titanium Movement
In-house calibre made entirely from titanium, for lightness, resilience, and chronometric reliability .
Hand-Polished Titanium Case
45mm case. 45 grams. Two materials. Fully mechanical assembly. Waterproof to 50 metres.
UNIQUE FEATURES
Magic Crown
Signature patented retractable crown made of 31 components, integrated at 6 o’clock for comfort and fluid design.
30° Inclined Flying Tourbillon
Flying tourbillon set at 30°, visually captivating and engineered for precise chronometric performance.
Titanium Movement
n-house calibre made entirely from titanium, for lightness, resilience, and chronometric reliability .
Hand-Polished Titanium Case
45mm case. 45 grams. Two materials. Fully mechanical assembly. Waterproof to 50 metres.
TECHNICAL DETAILS
DC6 NIGHT FOREST
Hand-wound movement with 5 patents in Titanium. Limited Edition of 8 pieces
Flying tourbillon inclined at 30° • hours and minutes • small second integrated to the tourbillon • power reserve
MOVEMENT
Movement dimensions
• Overall diameter: 35 mm (16 lines 1/4)
• Thickness: 6.20 mm
Number of components
• Movement: 287 components
• Tourbillon cage: 29 components
• Weight of the cage: 0.40 g
• Weight of the Vmepiece: 49,30 g
• "Magic crown": 31 components
Number of jewels
• 47
• Semi-gloss ruby jewel set in solid molded gold chatons
Chronometric power reserve
• 55 hours
• Indication by cam system
Barrels
• Two coaxial series-coupled fast-rotaVng barrels with a fixed-flange spring
Balance wheel
• In-house variable-inertia with gold mean-time screws (diameter 10mm)
Frequency
• 21’600 vibraVons/ hour (3Hz)
Balance spring
• Phillips terminal curve
• Titanium stud and stud holder
Bridges and main plate
• In Titanium
• Hand-polished beveled angles and polished chamfers, 18 inward beveled angles, mirror-polished, straightgrained, pearling under the bridges
• Special "Cô.tes du Solliat" hand-finishing
• Cascade bridges
Movement side
• 3° inclined movement relative to the case
• Black-polished Titanium tourbillon bridge, with hand-polished bevels and angles
• Gold plate with engraved and grained number, polished bevels and moldings, brushed flanks
• Yellow gold medallion with . bear head . logo
Tourbillon
• Single-axis flying 30° inclined
• Inclination of the cage by 3° relative to the case
• 60-second revolution
• Titanium tourbillon cage with blued Titanium
Gearing
• Sharp inward angles, beveled, diamond-milled on two sides
Displays
• Hours and minutes at 3 o'clock
• Small second at 9 o’clock
• Power reserve: hand indicator at 12 o'clock
EXTERIOR
Case
• Asymmetric 6 o'clock to 12 o'clock and symmetric 3 o'clock to 9 o'clock, basin-shaped form
• Baseband and bezel in UD carbon, lugs In sandblasted, satin-brushed and hand-polished Titanium
• Handmade “Pointes du Risoux” guilloché pattern Titanium plates, secured by 2 stainless steel screws
• Sapphire domes
• Sapphire case back with clipped olive at 6 o'clock
• Curved Titanium side lugs
• Engraving of "David Candaux" and "Handcrafted" on each side of the .magic crown . on a black zapon lacquered background
• Embossed engraving of "Tourbillon 30°", "David Candaux" and "Waterproof 30M" on the backside
Case dimensions
• Caseband diameter: 45 mm
• Case height: 11,29 mm
• Height on synthetic sapphire crystals: 13,53 mm
• Weight: 45 grams
Water resistance of the case
• Water-resistant 5 atm - 50 m - 100 q
Crown
• "Magic Crown", Pressure release mechanism
• 3 positions : neutral, time setting, winding
Dial side
• Semi-sphere subdial for hours and minutes in topaz green smocked anodized Ttanium at 3 o’clock
• Silver pad-printed Arabic numerals
• Hand-polished beveled indices in 18 ct grey gold
• Black graduated rim for minutes and secondes
• Black and zapon lacquered power reserve indicator with tampographed inscription “Le Coeur et l’Esprit”
Hands
• Hours in white lacquered Titanium, minutes in black anodized Titanium, both conical and curved, beveled and hand-polished
• Small seconds integrated into the tourbillon, in white lacquered Titanium
• Power reserve: inverted . syringe . shape in white lacquered Titanium
Strap and clasp
• In black textured handmade rubber, topaz green stitching with a velcro clasp engraved with the David Candaux logo
WARRANTY
All our models come with a 10-year international warranty.
TECHNICAL DETAILS
DC6 NIGHT FOREST
Hand-wound movement with 5 patents in Titanium. Limited Edition of 8 pieces
Flying tourbillon inclined at 30° • hours and minutes • small second integrated to the tourbillon • power reserve
MOVEMENT
Movement dimensions
• Overall diameter: 35 mm (16 lines 1/4)
• Thickness: 6.20 mm
Number of components
• Movement: 287 components
• Tourbillon cage: 29 components
• Weight of the cage: 0.40 g
• Weight of the Vmepiece: 49,30 g
• "Magic crown": 31 components
Number of jewels
• 47
• Semi-gloss ruby jewel set in solid molded gold chatons
Chronometric power reserve
• 55 hours
• Indication by cam system
Barrels
• Two coaxial series-coupled fast-rotaVng barrels with a fixed-flange spring
Balance wheel
• In-house variable-inertia with gold mean-time screws (diameter 10mm)
Frequency
• 21’600 vibraVons/ hour (3Hz)
Balance spring
• Phillips terminal curve
• Titanium stud and stud holder
Bridges and main plate
• In Titanium
• Hand-polished beveled angles and polished chamfers, 18 inward beveled angles, mirror-polished, straightgrained, pearling under the bridges
• Special "Cô.tes du Solliat" hand-finishing
• Cascade bridges
Movement side
• 3° inclined movement relative to the case
• Black-polished Titanium tourbillon bridge, with hand-polished bevels and angles
• Gold plate with engraved and grained number, polished bevels and moldings, brushed flanks
• Yellow gold medallion with . bear head . logo
Tourbillon
• Single-axis flying 30° inclined
• Inclination of the cage by 3° relative to the case
• 60-second revolution
• Titanium tourbillon cage with blued Titanium
Gearing
• Sharp inward angles, beveled, diamond-milled on two sides
Displays
• Hours and minutes at 3 o'clock
• Small second at 9 o’clock
• Power reserve: hand indicator at 12 o'clock
EXTERIOR
Case
• Asymmetric 6 o'clock to 12 o'clock and symmetric 3 o'clock to 9 o'clock, basin-shaped form
• Baseband and bezel in UD carbon, lugs In sandblasted, satin-brushed and hand-polished Titanium
• Handmade “Pointes du Risoux” guilloché pattern Titanium plates, secured by 2 stainless steel screws
• Sapphire domes
• Sapphire case back with clipped olive at 6 o'clock
• Curved Titanium side lugs
• Engraving of "David Candaux" and "Handcrafted" on each side of the .magic crown . on a black zapon lacquered background
• Embossed engraving of "Tourbillon 30°", "David Candaux" and "Waterproof 30M" on the backside
Case dimensions
• Caseband diameter: 45 mm
• Case height: 11,29 mm
• Height on synthetic sapphire crystals: 13,53 mm
• Weight: 45 grams
Water resistance of the case
• Water-resistant 5 atm - 50 m - 100 q
Crown
• "Magic Crown", Pressure release mechanism
• 3 positions : neutral, time setting, winding
Dial side
• Semi-sphere subdial for hours and minutes in topaz green smocked anodized Ttanium at 3 o’clock
• Silver pad-printed Arabic numerals
• Hand-polished beveled indices in 18 ct grey gold
• Black graduated rim for minutes and secondes
• Black and zapon lacquered power reserve indicator with tampographed inscription “Le Coeur et l’Esprit”
Hands
• Hours in white lacquered Titanium, minutes in black anodized Titanium, both conical and curved, beveled and hand-polished
• Small seconds integrated into the tourbillon, in white lacquered Titanium
• Power reserve: inverted . syringe . shape in white lacquered Titanium
Strap and clasp
• In black textured handmade rubber, topaz green stitching with a velcro clasp engraved with the David Candaux logo
WARRANTY
All our models come with a 10-year international warranty.
COMPANY
CUSTOMER CARE
CONTACT US
COLLECTIONS
LEGAL
© Copyright 2026. David Candaux. All Rights Reserved.
COMPANY
CUSTOMER CARE
CONTACT US
COLLECTIONS
LEGAL
© Copyright 2026. David Candaux. All Rights Reserved.